Tse ling
-
Li-Bolt tsa Hanger tse nang le Lipheletso tse peli Li-Bolt tse nang le Lihlooho tse peli Sekurufu sa Dowel sa Lehong Sekurufu sa Thepa Sekurufu sa Liropo tse nang le Li-Bolt tsa Sekurufu tse peli
Li-Hanger Bolts ke li-bolt tse se nang hlooho tse sebelisoang haholo-holo lits'ebetsong tsa lehong ho eketsa khoele ea kantle. Lehlakore le leng le na le khoele ea ho itlama e iketsang bakeng sa ho sebelisoa lehong, ha pheletso e 'ngoe e na le likhoele tsa UNC ho amohela nate e tloaelehileng. E loketse lits'ebetso tse hlokang sesebelisoa se ka tlosoang kapa lintho tse ling tse tlamang lehong.
Lisebelisoa:Tšepe ea k'habone, Tšepe e sa hloekangBoholo:E etselitsoe ho latela boholo bo qaqileng kapa litšoantšoMOQ:1,000pcs ka holimo, ho latela lihlahisoa kapa litekanyoSetifikeiti:ROHS, SGS, jj.Nako ea mohlala ea ho etella pele:Matsatsi a 3-7 a ho sebetsa boholo ba nakoNako e kholo ea ho etella pele:Matsatsi a 10-15 a ho sebetsa boholo ba onaMelao ea khoebo:EXW/FOB/CIF/CNF/FCA/DAP/DDP/DDUTefo:T/T, Paypal, West Union, L/C jj.Sephutheloana:Mekotla ea PE + lebokose le sootho + liphalete kapa e etselitsoeng litlhoko tsa hau -
Maoto a Fetotsoeng a Leveler a Boima a Boima a Sekoti a Fetotsoeng a Leveler bakeng sa Thepa ea Mechanical ea Thepa ea Mechanical
- Kaho e Tšoarellang: E entsoe ka tšepe e sa ruseng ea boleng bo holimo, tšepe ea khabone le thepa ea tšepe, maoto ana a ho lekalekanya a hahiloe ho mamella meroalo e boima le ho fana ka ts'ebetso e tšoarellang nako e telele.
- Likhetho tsa Boholo bo Ikhethileng: Li fumaneha ka boholo bo fapaneng, ho kenyeletsoa M8, M10, le M12, maoto ana a ho lekanya a ka fetoloa hore a lumellane le litlhoko tse itseng tsa basebelisi, ho netefatsa hore a lekana hantle bakeng sa thepa efe kapa efe ea ka tlung kapa ts'ebeliso ea mechini.
- E ka Fetoha le ho Tenyetseha: E na le leoto la ho lekanya screw, maoto ana a ka fetoloa habonolo ho netefatsa hore a lekana hantle le ho tsitsisa, e leng se etsang hore a lokele liindasteri tse fapaneng, ho kenyeletsoa thepa ea ka tlung, indasteri le tse ling.
- Likhetho tse 'Maloa tsa ho Qetela: E fumaneha ka li-fine tse koahetsoeng ka zinki, tse bentšitsoeng le tse sa rarahanang, maoto ana a ho leka-lekanya a ka etsoa hore a fihlelle likhetho le litlhoko tse itseng tsa basebelisi, ho netefatsa kopanyo e se nang sekoli le lisebelisoa kapa thepa ea ka tlung e seng e ntse e le teng.
- Ho latela Maemo a Machaba: A netefalitsoe ho latela ISO 9001:2015, maoto ana a ho leka-lekanya a fihlela maemo a holimo a boleng le polokeho, a fana ka khotso ea kelello bakeng sa basebelisi ba hlokang lihlahisoa tse fihlelang maemo a thata a machaba.
-
Tšepe ea Khabone e Rekisoang ka Cheseho DIN6885 GB1096 Mofuta oa A Lipheletso tse Potolohileng tse Habeli Shaft e bataletseng Senotlolo se Tšoanang
Lebitso la sehlahisoa: Linotlolo tse bataletsengBoholo: M3-M18
Lintho tse bonahalang: Tšepe e sa hloekang, tšepe ea carbon
Bolelele: E etselitsoe
Nako ea ho tlisa: Matsatsi a 7-15
Pakete: Pallet ea Lehong -
![[Kopi] GB873 Rivet e kgolo e bataletseng ya hlooho e nang le rivet e chitja ya hlooho e halofo](https://cdn.globalso.com/hsfastener/1728620819124.png)
[Kopi] GB873 Rivet e kgolo e bataletseng ya hlooho e nang le rivet e chitja ya hlooho e halofo
lebitso la sehlahisoa: rive ea hlooho e chitja e halofo
Mohlala: M8*50;M10*70
Thepa: tšepe ea carbon
'Mala: O motsho, o mosweu, o nang le mmala wa zinki
Sehlopha: Li-rivete tsa hlooho tse chitja tse halofo li sebelisoa e le li-fasteners bakeng sa ho rivete meahong ea tšepe e kang liboiler, marokho le lijana. Ho rivete ho khetholloa ka ho se tlosoe, haeba u batla ho arola likarolo tse peli tse rivete, u tlameha ho senya rivete
Sephutheloana sa sehlahisoa
Sephutheloana
1, E tletse ka lebokose: 25kg / lebokose, mabokose a 36 / pallet.
2, E tletse Mekotla: 25kg / Mokotlana o nang le Lithunya, 50kg / Mokotlana o nang le Lithunya
4, E tletse Lebokose: Mabokose a 4 ka lebokoseng le le leng la 25kg, Mabokose a 8 ka lebokoseng le le leng.
5, Sephutheloana se tla latela likopo tsa bareki. -
Setlama-qhoa se sa tloaelehang
Li-fasten tse seng tsa maemo li bolela li-fasten tse sa hlokeng ho lumellana le maemo, ke hore, li-fasten tse se nang litlhaloso tse tiileng tsa maemo, li ka laoloa le ho bapisoa ka bolokolohi, hangata ke moreki ho hlahisa litlhoko tse itseng, ebe ke moetsi oa li-fasten Ho latela lintlha tsena le tlhaiso-leseling, litšenyehelo tsa tlhahiso ea li-fasten tse seng tsa maemo hangata li phahame ho feta tsa li-fasten tse tloaelehileng. Ho na le mefuta e mengata ea li-fasten tse seng tsa maemo. Ke ka lebaka la tšobotsi ena ea li-fasten tse seng tsa maemo hore ho thata hore li-fasten tse seng tsa maemo li be le sehlopha se tloaelehileng.
Phapang e kgolo pakeng tsa di-fasteners tse tloaelehileng le di-fasteners tse seng tsa maemo ke hore na di na le maemo a tloaelehileng. Sebopeho, boholo, mokhoa wa ho taka, le ho tshwaya di-fasteners tse tlwaelehileng di na le maemo a thata a behilweng ke mmuso. (Dikarolo), di-fasteners tse tlwaelehileng tse tlwaelehileng ke dikarolo tse nang le dikgwele, dikonopo, di-pin, di-rolling bearing le tse ding.
Li-fasteners tse seng tsa maemo lia fapana bakeng sa hlobo ka 'ngoe. Likarolo tse holim'a hlobo tse amanang le boemo ba sekhomaretsi sa sehlahisoa hangata ke likarolo tse seng tsa maemo. Tse ka sehloohong ke hlobo e ka pele, hlobo e ka morao, le ntho e kenngoang. Ho ka boela ha thoe ntle le li-screws, li-spout, thimble, li-apron, li-spring le li-blanks tsa hlobo, hoo e ka bang kaofela ke li-fasteners tse seng tsa maemo. Haeba u batla ho reka li-fasteners tse seng tsa maemo, ka kakaretso u lokela ho fana ka tlhahiso ea moralo joalo ka litlhaloso tsa tekheniki, litšoantšo le li-draft, 'me mofani oa thepa o tla lekola bothata ba li-fasteners tse seng tsa maemo ho latela sena, 'me a hakanye tlhahiso ea li-fasteners tse seng tsa maemo pele. Litšenyehelo, sehlopha, potoloho ea tlhahiso, jj.Sesebelisoa se sa Tloaelehang sa Size-Handan Haosheng Fastener
- Boholo bo sa tloaelehang kapa khoele feela hangata li lekane ho hloka ho etsoa ka mokhoa o ikhethileng
- E entsoe ka thepa e sa tloaelehang le/kapa e hloka ho latelwa ha thepa
- E na le lintho tse sa tloaelehang tse koahelang kapa litlhoko tse ling
-
Bolt ea Kariki/Bolt ea Kou/Bolt ea molala o chitja o nang le hlooho e chitja
bolt ea kariki
Bolo ea koloi (e boetse e bitsoa bolo ea koloi le bolo ea hlooho e chitja e chitja) ke mofuta oa bolo e sebelisetsoang ho tlama tšepe ho tšepe kapa, hangata, lehong ho tšepe. E boetse e tsejoa e le bolo ea hlooho ea kopi Australia le New Zealand.
E khetholloa ho libolu tse ling ka hlooho ea eona e sa tebang ea li-mushroom le taba ea hore karolo e tšekaletseng ea shank, leha e le chitja ka boholo ba bolelele ba eona (joalo ka mefuta e meng ea bolutu), e sekwere ka tlas'a hlooho. Sena se etsa hore bolutu e itšetlehe ka boeona ha e kenngoa ka lesoba le sekwere ka har'a lebanta la tšepe. Sena se lumella sehokelo ho kenngoa ka sesebelisoa se le seng feela, spanner kapa wrench, se sebetsang ho tloha lehlakoreng le leng. Hlooho ea bolutu ea koloi hangata ke dome e sa tebang. Shank ha e na likhoele; 'me bophara ba eona bo lekana le lehlakore la karolo e tšekaletseng ea sekwere.
Bolo ea koloi e ne e etselitsoe ho sebelisoa ka poleiti ea tšepe e matlafatsang mahlakoreng ka bobeli a lepolanka la lepolanka, karolo e sekoere ea bolo e kenella ka lesoba le sekoere mosebetsing oa tšepe. Ho tloaelehile ho sebelisa bolo ea koloi ho hlobolisa mapolanka, karolo e sekoere e fana ka ho lekana ho thibela ho potoloha.
Bolo ea koloi e sebelisoa haholo linthong tsa tšireletso, tse kang liloko le lihinge, moo bolo e lokelang ho tlosoa lehlakoreng le le leng feela. Hlooho e boreleli, e nang le dome le nate e sekoere ka tlase li thibela bolo ea koloi ho notlolloa lehlakoreng le sa sireletsehang.
-
NOKO EA NYLON
Nate ea nyloc, eo hape e bitsoang nate ea nylon-insert lock, nate ea polymer-insert lock, kapa nate ea elastic stop, ke mofuta oa nate ea lock e nang le molala oa nylon o eketsang khohlano khoeleng ea screw.
-
Mochini o Hlatsoang o Folete
Mochini oa ho hlatsoa hangata o bolela:
Mochini oa ho hlatsoa (hardware), poleiti e tšesaane e atisang ho ba sebopeho sa diski e nang le lesoba bohareng e atisang ho sebelisoa le bolt kapa nate
-
Thupa e nang le khoele
DIN975,Thupa e nang le khoele, e tsejoang hape e le stud, ke thupa e telele haholo e nang le khoele mahlakoreng ka bobeli; khoele e ka atoloha ho potoloha bolelele bohle ba thupa. Li etselitsoe ho sebelisoa ha ho tsitsitse. Thupa e nang le khoele ka mokhoa oa setoko sa bare hangata e bitsoa khoele-tsohle.
1. Thepa: Tšepe ea Khabone Q195, Q235, 35K, 45K, B7, SS304, SS316
2. Kereiti: 4.8,8.8,10.8, 12.9; 2, 5, 8, 10 ,A2, A4
3. Boholo: M3-M64, bolelele ho tloha ho mithara e le 'ngoe ho isa ho mithara e meraro
4. Maemo a Tloaelehileng: DIN975/DIN976/ANSI/ASTM -
Nate e Telele ea Hex/Nate e Kopanyang DIN6334
SETAELE Nete e Telele ea Hex
DIN e Tloaelehileng 6334
Boholo M6-M36
Sehlopha sa Sehlopha: 4,6,8,10,12;SS: SS304,SS316
Ho koahela (tšepe ea k'habone) e ntšo, zinki, HDG, Kalafo ea mocheso, Dacromet, GEOMET
LINTHO TSE BONOLO Tšepe ea k'habone, Tšepe e sa hloekang
HO PHAKISA bongata/mabokose ka mabokoseng, bongata ka mekotlana/libakete, jj.
PALLET pallet ea lehong le tiileng, pallet ea plywood, lebokose/mokotla oa ton, jj.
