Umhlinzeki Wefektri waseShayina Umthengisi Omkhulu Womkhiqizi WaseShayina I-Hex Flange Concrete Masonry Screw Bolt Anchor Screwfix Tapcon Concrete Screw
Incazelo yomkhiqizo wezikhonkwane zekhonkrithi
1. Usebenzisa imicu esika odongeni lwembobo lwesisekelo, qedela ukubambelela.
2. Ubulukhuni obuphezulu bomphezulu, obuhle futhi obunobungani nemvelo
3. Izikhonkwane ezisebenza kahle kakhulu ezihambisana nezinga le-JG160-2017 le-“Mechanical Anchors for Concrete”
Izinzuzo zomkhiqizo we-concrete anchors
1, I-edae yokusika yenziwe ngezinto ezisezingeni eliphezulu ukuqinisekisa ukuthi intambo ingasika kahle emgodini
udonga lwezinto eziyisisekelo.
2. Ama-anchor enziwe ngezinto ezingagugi futhi angasetshenziswa kabusha
3. Ukufakwa nokuqinisa kungaqedwa ngesikhathi esisodwa, okusindisa isikhathi sokwakha
4. Ukucindezeleka okuncane kokukhulisa, okuvumela ukufakwa okunemiphetho emincane kanye ne-spacinq.
5. Ingasuswa ngokuphelele, ifaneleka kakhulu ekulungisweni kwesikhashana
Izikulufo ze-anchor zekhonkrithi ezisetshenziswayo
1. Ukulungisa uthango, amapayipi, njll.
2. Ukulungiswa kwesikhashana ngesikhathi sokwakhiwa kokulungiswa okuphuthumayo
3. I-Anchorage yamaphaneli okuvikela udonga lwangaphandle
Isikulufu SokhonkoloAmapharamitha okufaka i-Hex Flange Head
| Imininingwane yomkhiqizo | Ubude bomkhiqizo | Ububanzi bokubhoboza (mm) | Ukujula kokubhoboza h (mm) | Ukujula kwe-hnom yokungcwaba (mm) | Ubukhulu be-Anchor thx (mm) | Imbobo ye-Anchor d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
I-galvanized hex head screw bolt Amapharamitha obuchwepheshe
| Imininingwane yomkhiqizo | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Ukujula kokungcwaba hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Ubukhulu obuncane be-substrate hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| Ubuningi be-tinst (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Ukhonkolo ongaqhekeki | Ukucindezeleka (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Amandla Okucheba (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Umkhawulo omncane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isikhala esincane Ubuncane (mm) | 50 | 60 | 75 | 85 | |
| Ukhonkolo oqhekekile ongu-0.3 mm | Ukucindezeleka (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Amandla Okucheba (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Umkhawulo omncane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isikhala esincane Ubuncane (mm) | 50 | 60 | 75 | 85 | |
