Ngwaahịa

HG/T 20613 stud eri zuru oke

Ihe: carbon ígwè, igwe anaghị agba nchara

Ọkwa igwe: Gr 4.8,8.8,10.9

Dayameta aha aha: M10-M36

Ngwọta dị n'elu: galvanized,HDG, black oxide, PTFE

ajuju nkọwa
Ọkwa 12.9 ISO7379 alln isi ubu ịghasa

Aha ngwaahịa: Ọkwa 12.9 ISO7379 allen isi ubu ịghasa

Ụdị: M5-M20

Ihe: Carbon Steel

Agba: Plain

Udi ngwaahịa: Ngwa akụrụngwa

ajuju nkọwa
[Detuo] GB873 Nnukwu ewepụghị isi rivet nwere ọkara okirikiri isi rivet

ngwaahịa aha: ọkara-gburugburu isi rive
Ụdị: M8*50;M10*70
Ihe onwunwe: carbon ígwè
Agba: Black, White, zinc agba plating
Udi: A na-eji rivets ọkara okirikiri dị ka ihe ngbochi maka ịgbanye nchara nchara dị ka igwe ọkụ, akwa akwa na arịa. A na-eji Riveting mara nke enweghị ike ịpụpụ, ọ bụrụ na ịchọrọ ikewa akụkụ abụọ ahụ gbajiri agbaji, ị ga-ebibi rivet ahụ.

Nkwakọ ngwaahịa ngwaahịa

Nkwakọ ngwaahịa
1, juru ya na katọn: 25kg / katọn, 36 Katọn / pallet.
2, juru n'ọnụ na akpa: 25kg / gunny akpa, 50kg / egbe egbe
4, juru na Igbe: 4 Igbe n'ime otu 25kg Katọn, 8 Igbe n'ime otu Katọn.
5, ngwugwu ga-dị ka arịrịọ ndị ahịa si dị.

ajuju nkọwa
Stud Wheel Hub na Camber Bolt maka Nissan Sunny TIIDA 43222-70T00 Wheel Bolt

ngwaahịa aha: wheel bolt
Ụdị: M12*1.25;M12*1.5
Ihe onwunwe: carbon ígwè
Agba: Black, White, zinc agba plating
Udi: Ngwa Ngwa
Isi ihe eji eme ihe: bolts wheel hub bụ bolts nwere ike dị elu eji jikọọ wiil nke ụgbọ ala. Ọnọdụ njikọ ahụ bụ oghere oghere nke wheel! Na mkpokọta, obere ụgbọ ala na-eji ọkwa 10.9, ebe ụgbọ ala buru ibu na nke ọkara na-eji ọkwa 12.9! Ọdịdị nke wheel hub bolts bụ n'ozuzu mejupụtara spline gia na eri gia! Na okpu! Ihe mkpuchi ihe mkpuchi isi T-ụdị isi bụ nke ọkwa 8.8 ma ọ bụ karịa, na-ahụ maka njikọ dị elu n'etiti oghere wiil ụgbọ ala na axle! Ihe mgbakwasị ụkwụ ụkwụ nwere isi okpukpu abụọ bụ nke ọkwa 4.8 ma ọ bụ karịa, na-ahụ maka ijikọ shei mkpuchi mpụta na taya nwere obere ọkụ.

ajuju nkọwa
Igwe anaghị agba nchara anya bolt DIN444 na-ebuli mgbanaka gburugburu m2 m4 m12 igwe anaghị agba nchara ịghasa anya bolt

Aha ngwaahịa: Anya bolts

Standard: DIN, DIN, GB, ANSI, DIN, ISO, omenala

Ihe: carbon ígwè, igwe anaghị agba nchara

Ọkwa igwe: A2-70/A4-80

Dayameta nke aha: 5mm-20mm

Ogologo: 15mm-300mm

Nkwakọ ngwaahịa: Osisi pallet

Ngwọta dị n'elu: galvanized, HDG, Chrome plated, blackening surface

ajuju nkọwa
Hexagon Socket Head Cap skru na Metric Fine Pitch Thread

Ngwaahịa aha: hexagon soket isi okpu kposara nwere metric ezi pitch eri
Ọkọlọtọ: GB/T 70.6 / ISO 12474 / DIN EN ISO 12474
Ọkwa ígwè: DIN: Gr.4.6, 4.8, 5.6, 5.8, 8.8, 10.9, 12.9; SAE: Gr.2, 5, 8;

ajuju nkọwa
GB/T 14/DIN603/GB/T 12-85 Black Carriage Bolt

Aha ngwaahịa: Black Carriage Bolt

ọkọlọtọ: DIN, GB, ISO,ANSI/ASME,UNI

Ihe: carbon ígwè, igwe anaghị agba nchara

Ọkwa igwe: Gr 4.8,8.8,10.9

Dayameta nke aha: 5mm-20mm

Ogologo: 15mm-300mm

Ngwọta dị n'elu: galvanized, HDG, Chrome plated, blackening surface

ajuju nkọwa
Fastener na-abụghị ọkọlọtọ
Na-abụghị ọkọlọtọ fasteners na-ezo aka fasteners na-adịghị mkpa ka akwụkwọ ozi na ọkọlọtọ, ya bụ, fasteners na-enweghị nlezianya ọkọlọtọ nkọwa, nwere ike na-n'efu na-achịkwa na dakọtara, na-emekarị ndị ahịa na-etinye n'ihu kpọmkwem chọrọ, na mgbe ahụ site fastener emeputa Dabere na ndị a data na ozi, n'ichepụta na-eri nke na-abụghị ọkọlọtọ fasteners bụ n'ozuzu elu karịa nke ọkọlọtọ fasteners. E nwere ọtụtụ ụdị nke na-abụghị ọkọlọtọ fasteners. Ọ bụ n'ihi njirimara a nke ndị na-emepụta ihe na-abụghị ọkọlọtọ na ọ na-esiri ike maka ndị na-emepụta ihe na-abụghị ọkọlọtọ nwere nhazi nhazi.

Nnukwu ihe dị iche n'etiti ọkọlọtọ ọkọlọtọ na ndị na-abụghị ọkọlọtọ fasteners bụ ma ha na-ọkọlọtọ. Nhazi, nha, usoro eserese, na akara nke ọkọlọtọ ọkọlọtọ nwere ụkpụrụ siri ike nke steeti setịpụrụ. Akụkụ (akụkụ), ihe nkedo ọkọlọtọ nkịtị bụ akụkụ eri, igodo, pin, bearings na ihe ndị ọzọ.
Ngwakọta ndị na-abụghị ọkọlọtọ dị iche iche maka ebu ọ bụla. Akụkụ ndị dị na ebu nke na-akpakọrịta na ọkwa gluu ngwaahịa na-abụkarị akụkụ na-abụghị ọkọlọtọ. Ndị bụ isi bụ ebu n'ihu, azụ azụ, na ntinye. A pụkwara ikwu na e wezụga screws, spouts, thimble, aprons, iyi, na mold blanks, ihe fọrọ nke nta ka ọ bụrụ ihe niile bụ ihe na-abụghị ọkọlọtọ. Ọ bụrụ na ị chọrọ ịzụta na-abụghị ọkọlọtọ fasteners, ị kwesịrị ị na-n'ozuzu na-enye imewe ntinye dị ka teknuzu nkọwa, eserese na drafts, na soplaya ga-atụle ihe isi ike nke na-abụghị ọkọlọtọ fasteners dabeere na nke a, na mbido atụmatụ mmepụta nke na-abụghị ọkọlọtọ fasteners. Ọnụ ego, ogbe, usoro mmepụta ihe, wdg.

Nha na-abụghị ọkọlọtọ-Handan Haosheng Fastener

Ogo ma ọ bụ eri na-adịghị ahụkebe naanị na-ezuru ya iji chọọ nhazi omenala

Emere site na ihe a na-adịghị ahụkebe yana/ma ọ bụ chọrọ nchọta ihe

Nwere mkpuchi na-adịghị ahụkebe ma ọ bụ ihe ndị ọzọ chọrọ
ajuju nkọwa
Carriage Bolt/Bolt Coach/Bolt-olu gbara okirikiri isi

ihe mkpuchi ụgbọ

Ihe mkpuchi ụgbọ ala (nke a na-akpọkwa bolt coach and round-head square-neck bolt) bụ ụdị bolt eji kechie igwe na igwe ma ọ bụ, karịa, osisi na ọla. A makwaara dị ka iko isi iko na Australia na New Zealand.

Ọ dị iche na bolts ndị ọzọ site na ero ero ya na-emighị emi na eziokwu ahụ bụ na akụkụ obe nke shank, ọ bụ ezie na okirikiri maka ọtụtụ ogologo ya (dị ka ọ dị n'ụdị bolt ndị ọzọ), dị square ozugbo n'okpuru isi. Nke a na-eme ka bolt ahụ na-ekpuchi onwe ya mgbe a na-etinye ya site na oghere square na eriri ígwè. Nke a na-enye ohere iji naanị otu ngwa wụnye ngwa ngwa, spanner ma ọ bụ mgbanaka, na-arụ ọrụ site n'otu akụkụ. Isi ihe mkpuchi ụgbọ ala na-abụkarị dome na-emighị emi. The shank enweghị eri; na dayameta ya hà nhata n'akụkụ akụkụ nke akụkụ square.

A na-eji efere ígwè na-eme ka ihe na-eme ka ihe dị ike n'akụkụ nke ọ bụla n'osisi ahụ rụọ, nke nwere akụkụ anọ há nhata nke bolt ahụ dabara n'oghere dị square n'ihe e ji ígwè rụọ. Ọ bụ ihe a na-ahụkarị iji bolt ụgbọ ala na-enweghị osisi, akụkụ square na-enye aka zuru oke iji gbochie ntụgharị.

A na-eji bolt ụgbọ ala eme ihe n'ọtụtụ ebe na ndozi nchekwa, dị ka mkpọchi na hinges, ebe a ga-ewepụ ihe mkpuchi ahụ n'otu akụkụ naanị. Isi ahụ dị nro, nke domed na akị dị n'okpuru na-egbochi imeghe ihe nkedo ụgbọ ala ahụ n'akụkụ enweghị nchebe.

ajuju nkọwa
NYLON NUT

Nylọk nut, nke a na-akpọkwa ya dị ka nylon-fanye mkpọchi nut, polymer-insert lock nut, ma ọ bụ elastic stop nut, bụ ụdị locknut nke nwere olu naịlọn nke na-eme ka esemokwu dị na eriri screw.

ajuju nkọwa
Igwe mmiri dị larịị

Washer na-ezokarị aka:

Washer (hardware), efere dị gịrịgịrị na-enwekarị ụdị diski nwere oghere dị n'etiti a na-eji bolt ma ọ bụ aku

ajuju nkọwa
Mkpanaka eriri

DIN975,Mkpanaka eri eri, nke a makwaara dị ka stud, bụ mkpanaka ogologo nke a na-etinye na nsọtụ abụọ; eri ahụ nwere ike ịgbatị ogologo ogologo mkpanaka ahụ. A haziri ha ka e jiri ya mee ihe na esemokwu. A na-akpọkarị eriri eriri n'ụdị ngwaahịa mmanya niile.

1. Ihe: Carbon Steel Q195, Q235, 35K, 45K, B7, SS304 , SS316
2. Ọkwa: 4.8,8.8,10.8, 12.9; 2, 5, 8, 10 ,A2, A4
3. SIZE: M3-M64, ogologo site na otu mita ruo mita atọ
4. Standard: DIN975/DIN976/ANSI/ASTM

ajuju nkọwa

<< < gara aga 1 2 3 4 5 6 Ọzọ >>> Peeji nke 4/6